Velocity Reviews

Velocity Reviews (http://www.velocityreviews.com/forums/index.php)
-   Computer Support (http://www.velocityreviews.com/forums/f33-computer-support.html)
-   -   FDISK Question (http://www.velocityreviews.com/forums/t182451-fdisk-question.html)

Ged 10-09-2003 02:17 PM

FDISK Question
 
Im trying to create a new partition on a 4 GB fuji hard drive using fdisk in
dos 6.0
I Deleted the old partition and now while trying to create a new one
I get the message -write protect error writing fixed disk
This message appears at 1%.

My first impression would be a faulty drive /
I`m not sure if the write protection can be removed.

Thankyou / all



Werner Flamme 10-09-2003 02:29 PM

Re: FDISK Question
 
Ged schrieb am 09.10.2003 16:17:
> Im trying to create a new partition on a 4 GB fuji hard drive using fdisk in
> dos 6.0
> I Deleted the old partition and now while trying to create a new one
> I get the message -write protect error writing fixed disk
> This message appears at 1%.
>
> My first impression would be a faulty drive /
> I`m not sure if the write protection can be removed.
>
> Thankyou / all
>
>


As far as I know, DOS 6 handles Disks only up to 2 GB. And I never saw a
write protected (by hardware) hard drive.

--
Werner Flamme, Abt. WKDV
UFZ Umweltforschungszentrum Leipzig-Halle GmbH,
Permoserstr. 15, 04318 Leipzig
eMail: werner.flamme@ufz.de, Tel.: (0341) 235-2500





Harrison 10-09-2003 02:39 PM

Re: FDISK Question
 
Use a Windows 98 boot disk.
www.bootdisk.com

On Thu, 9 Oct 2003 15:17:18 +0100, "Ged" <jonifresh@aol.com> wrote:

>Im trying to create a new partition on a 4 GB fuji hard drive using fdisk in
>dos 6.0
>I Deleted the old partition and now while trying to create a new one
>I get the message -write protect error writing fixed disk
>This message appears at 1%.
>
>My first impression would be a faulty drive /
>I`m not sure if the write protection can be removed.
>
>Thankyou / all
>



John 10-09-2003 03:29 PM

Re: FDISK Question
 
If your using dos 6.0 or above then the fdisk util
on there should be ok
As for the write protect message ur drive is bad
Bin it and get a new one.



"Ged" <jonifresh@aol.com> wrote in message
news:bm3ql7$pkq$1@newsg2.svr.pol.co.uk...
> Im trying to create a new partition on a 4 GB fuji hard drive using fdisk

in
> dos 6.0
> I Deleted the old partition and now while trying to create a new one
> I get the message -write protect error writing fixed disk
> This message appears at 1%.
>
> My first impression would be a faulty drive /
> I`m not sure if the write protection can be removed.
>
> Thankyou / all
>
>




°Mike° 10-09-2003 07:25 PM

Re: FDISK Question
 
Have you disabled virus detection in the BIOS?


On Thu, 9 Oct 2003 15:17:18 +0100, in
<bm3ql7$pkq$1@newsg2.svr.pol.co.uk>
Ged scrawled:

>Im trying to create a new partition on a 4 GB fuji hard drive using fdisk in
>dos 6.0
>I Deleted the old partition and now while trying to create a new one
>I get the message -write protect error writing fixed disk
>This message appears at 1%.
>
>My first impression would be a faulty drive /
>I`m not sure if the write protection can be removed.
>
>Thankyou / all
>


--
Basic computer maintenance
http://uk.geocities.com/personel44/maintenance.html

Dead_Dad 10-09-2003 11:09 PM

Re: FDISK Question
 
Werner Flamme wrote:
> Ged schrieb am 09.10.2003 16:17:
>> Im trying to create a new partition on a 4 GB fuji hard drive using
>> fdisk in dos 6.0
>> I Deleted the old partition and now while trying to create a new one
>> I get the message -write protect error writing fixed disk
>> This message appears at 1%.
>>
>> My first impression would be a faulty drive /
>> I`m not sure if the write protection can be removed.
>>
>> Thankyou / all
>>
>>

>
> As far as I know, DOS 6 handles Disks only up to 2 GB. And I never
> saw a write protected (by hardware) hard drive.


I put a write protect switch on my backup drive way back when (It was a 40MB
MFM ANAICR - that should tell you how long ago it was <G>). I just snipped
one of the data wires (I forget which one), hooked up a microtoggle across
the gap, and mounted it on the back of the case next to the reset button.

Thnik about it!
Dead_Dad



Jeroen Bakker 10-10-2003 12:16 AM

Re: FDISK Question
 
Harrison,

I did some checking on Google and I seem to have found an answer to your
problem. I think the answer lies in the post I found on the web at:
http://mall.eyo.com.au/tech-forum/posts/394736.html It explains that you
have to set the jumper on your hardrive to CS (Cable Select) and use the
last plug on your IDE cable (the blue one) to connect your harddrive to the
MB (Mother Board). I hope you can understand the post, if not let me know
and I'll see what else I can do. Good luck!

Ciao,

Elmo



"Harrison" <nothanksonthespam@gainpro.com> wrote in message
news:dnsaovcv75uhoorjgo1hkfeol4j5keear0@4ax.com...
> Use a Windows 98 boot disk.
> www.bootdisk.com
>
> On Thu, 9 Oct 2003 15:17:18 +0100, "Ged" <jonifresh@aol.com> wrote:
>
> >Im trying to create a new partition on a 4 GB fuji hard drive using fdisk

in
> >dos 6.0
> >I Deleted the old partition and now while trying to create a new one
> >I get the message -write protect error writing fixed disk
> >This message appears at 1%.
> >
> >My first impression would be a faulty drive /
> >I`m not sure if the write protection can be removed.
> >
> >Thankyou / all
> >

>





All times are GMT. The time now is 06:12 PM.

Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.